Meltem M-WRG-ii P-F
PASSIVE HOUSE CERTIFIED
Decentralised ventilation unit with 5 ventilation levels including
time-limited intensive ventilation, operation at the unit – optionally by
wireless remote control, cross-counterflow heat exchanger,
material: ABS, colour: white, similar to RAL 9010
Energy efficiency class: B
Please note: flush-mount installation requires an M-WRG-II
flush-mount installation kit.
Unit Offers:
- 4 ventilation levels
- Humidity control (RH)
- Temporary intensive ventilation
- Control input
- Optional unit OFF input (smoke detector,
24 V window contact) - Minimum ventilation program to DIN 18017-3, factory setting, CANNOT BE SWITCHED OFF, optional
- Ventilation for moisture protection with humidity control, CANNOT BE SWITCHED OFF, optional
- Visual filter change indicator
- Reading the operating hours with accessories
- RH supply air > RH extract air display
- Visual fault indicator LED / symbol
- Operating status LED
- Frost protection function
Technical Data:
- Up to 94 % heat recovery efficiency
- Cross-counter flow heat exchanger
- Enthalpy heat exchanger with moisture recovery possible
- Constant volume flow rate (suitable for multi-story buildings)
- Inherent noise from LpA, 10 m² = 8.4 dB(A)
- Sound insulation D new up to 70 dB
- Filter class ISO ePM1 60% (F7) as standard
- Pollutants in the outdoor air can be detected by optional VOC sensor
- High air flow 10 - 100 m3/h
- Single or multi-room solution
- Passivhaus (PHI)-certied
- Tested to VDI 6022 sheet 1 hygiene standards